AirCrewU

Introduction to Aircraft Engines

How piston and gas-turbine engines produce power, how they are monitored and how they are maintained.

Beginner Core course Maintenance & Engineering
Aircraft Maintenance & Engineering Academy Kenji Watanabe Demo profile 2h 17m English Updated November 2026

What you will learn

  • Explain how thrust is produced using Newton's third law
  • Describe the four strokes of a piston engine and the stages of the Brayton cycle
  • Identify the main components and supporting systems of a piston engine
  • Compare turbojet, turbofan, turboprop and turboshaft engines
  • Interpret common engine parameters such as N1, N2, EGT and oil pressure
  • Outline common engine inspection methods and ground-run safety precautions

About this course

Introduction to Aircraft Engines explains how the two main families of aircraft powerplant work. You will start with the physics of thrust and the thermodynamic cycles behind every engine: the four-stroke Otto cycle used by piston engines and the Brayton cycle used by gas turbines. From there the course walks through piston engine construction, induction and fuel metering, ignition, lubrication and cooling, followed by the major sections of a gas-turbine engine and the differences between turbojets, turbofans, turboprops and turboshafts.

The final modules connect theory to the hangar. You will learn which parameters crews and technicians monitor, how engines are inspected using borescopes, oil analysis and trend monitoring, why life-limited parts and foreign object damage matter, and how to stay safe around running engines. The course is educational self-study material and does not replace approved training or type training. The completion certificate is not a license, rating or regulatory qualification.

Engine thermodynamicsPiston engine systemsGas-turbine architectureEngine monitoringEngine inspection

Course curriculum

4 modules · 13 lessons · 2h 17m total

The physics of thrust and the thermodynamic cycles behind piston and turbine engines.

How Aircraft Engines Produce Thrust (Reading) Free preview Reading · 8 min
The Four-Stroke Piston Cycle (Reading) Reading · 9 min
The Brayton Cycle and Gas Turbines (Reading) Reading · 9 min
Final Assessment (Assessment) Assessment · 20 min

Construction, induction, fuel metering, ignition, lubrication and cooling of piston engines.

Piston Engine Construction (Reading) Reading · 10 min
Induction, Fuel Metering and Carburetor Icing (Reading) Reading · 11 min
Ignition, Lubrication and Cooling (Reading) Reading · 10 min

The sections of a gas turbine, the main engine types and the parameters used to monitor them.

Sections of a Gas-Turbine Engine (Reading) Reading · 11 min
Turbojets, Turbofans, Turboprops and Turboshafts (Reading) Reading · 10 min
Engine Parameters and Limits (Reading) Reading · 10 min

How engines are inspected and monitored, how their life is managed and how to stay safe during ground runs.

Inspecting and Monitoring Engines (Reading) Reading · 10 min
Foreign Object Damage, Hot Sections and Life Limits (Reading) Reading · 10 min
Engine Starting and Ground-Run Safety (Reading) Reading · 9 min

Requirements

  • No prior engine knowledge required
  • Basic secondary-school mathematics and physics are helpful
  • Completion of Aircraft Maintenance Fundamentals is recommended but not required

Who this course is for

  • Aspiring aircraft maintenance technicians and engineers
  • Student pilots who want a deeper understanding of their powerplant
  • Aviation professionals who work with engine data or engine shops
  • Enthusiasts curious about how aircraft engines work

Assessment

  • Final assessment: 10 questions including multiple choice, multiple select, true/false, fill-in-the-blank, matching and scenario-based questions.
  • Passing score: 70%.
  • Time limit: 20 minutes.
  • Retakes: 3 attempts in total; questions are shuffled on every attempt.
  • Feedback: after each attempt you see your score, which answers were correct, and an explanation for each question.

Certificate

On completing every lesson and passing the final assessment, you receive an AirCrewU Course Completion Certificate with a unique certificate number and QR code that anyone can check at aircrewu.com/verify-certificate.

An AirCrewU certificate confirms that you completed this online course. It is not a pilot, engineer, dispatcher or crew license, rating, type rating or any other regulatory qualification, and it is not issued or recognized by the FAA, EASA, ICAO, IATA or any national aviation authority. Learn more about our certificates.

Instructor

Kenji Watanabe

Licensed aircraft maintenance engineer and technical trainer

Demo profile This is a demonstration instructor profile used while AirCrewU onboards its faculty. Its background and qualifications are illustrative and have not been verified.

Kenji began his career as a maintenance apprentice and went on to work in both line and base maintenance on turbofan-powered transport aircraft, eventually holding certifying privileges. He later moved into technical training, preparing new technicians for their first years on the hangar floor.

He is passionate about maintenance human factors and the role that good documentation, clear handovers and a willingness to speak up play in preventing errors. His teaching combines technical explanation with the practical habits of a careful engineer.

Learner reviews

No reviews yet. Reviews can only be written by learners enrolled in this course.

Part of these learning programs

Related courses